Paint corrected first, then sealed under a certified ceramic coating — protection engineered for road salt, UV, and Ontario winters.
A ceramic coating is only ever as good as the paint underneath it. Coating locks in whatever condition the surface is in, so swirls, etching, and bonded contamination sealed under ceramic stay visible for years. Royal Caspian Detailing treats coating as the final step of a longer process: decontamination, staged paint correction measured against actual paint depth, panel wipe, and only then application in a controlled environment. Toronto is a genuinely hostile climate for paint — road salt through winter, sustained UV in summer, and constant freeze-thaw cycling. A properly prepared and applied coating gives you years of chemical resistance and dramatically easier washing, and it holds gloss far longer than any wax or sealant can. It is not, however, body armour, and we will be straightforward with you about what it does and does not prevent.
pH-neutral wash, iron fallout removal, tar removal, and mechanical decontamination to strip everything bonded to the paint.
Readings taken across every panel before correction. Correcting without knowing your paint depth risks cutting through clearcoat.
Compounding and refinement staged to your paint's condition, removing swirls, wash marring, and etching before anything is sealed.
All polishing oils removed with a dedicated panel wipe, so the coating bonds directly to the clearcoat rather than to residue.
Coating applied panel by panel in a controlled environment, with layering and flash times per the manufacturer's specification.
Wheel faces and barrels, glass, and exterior trim coated so brake dust releases easily and glass sheds water.
The vehicle is held for the full initial cure. Rushing a coating out into rain or salt in the first hours compromises it permanently.
Written aftercare guidance plus an optional annual maintenance detail to keep the coating performing to its rated life.
Years of protection rather than the weeks a wax realistically lasts
Strong chemical resistance to road salt, bird droppings, and tree sap
Hydrophobic surface — water and dirt release instead of clinging
Washing becomes dramatically faster and less likely to inflict swirls
UV resistance that slows oxidation and pigment fade
Deep, consistent gloss that holds rather than fading after a month
Better presentation and condition at resale or lease return
Applied over corrected paint, so the finish underneath is genuinely right
We assess the paint under inspection lighting and take depth readings across every panel to establish what correction is safely possible.
Full wash, iron and tar removal, and mechanical decontamination so nothing bonded to the paint survives into correction.
Staged compounding and refinement to remove defects, cutting only as far as the paint depth safely allows.
Polishing oils fully stripped so the coating bonds to bare clearcoat. Skipping this is the most common cause of early coating failure.
Applied panel by panel in a controlled environment with correct flash and levelling times, then wheels, glass, and trim.
The vehicle is held for the full initial cure, then handed over with written aftercare guidance and your maintenance schedule.
We do not coat uncorrected paint. Sealing swirls and etching under ceramic preserves the damage for years — a cheap coating over bad paint is money genuinely wasted.
Paint depth readings across every panel before correction begins. Detailers who skip this step are the reason cars come to us with clearcoat burned through on edges.
Ceramic coating resists chemicals and makes washing easier. It does not stop rock chips or deep scratches — that is what paint protection film is for, and we will tell you when PPF is the better spend.
Contact Royal Caspian today for a free, no-obligation quote. Proudly serving Toronto and the Greater Toronto Area.
Request a Free Quote